Toshiba M30 Manual Do Utilizador

Página de 236
User's Manual
8-12
O
PTIONAL
 D
EVICES
7.
Turn on the computer.
8.
9. Select the 
Parallel/Printer
 tab from the 
TOSHIBA HW Setup
window.
10.
Set the 
Parallel Port Mode
 and press 
OK
.
11.
Choose 
Reboot
 for the change to take effect.
12.
Select the printer in Windows Add Print Wizard. To access the 
Add Print
Wizard
 utility, click 
Start
, point to 
Settings
, click 
Printers
 
and double
click the 
Add Printer
 icon.
i.LINK (IEEE1394)
i.LINK (IEEE1394) is used for high-speed data transfer for a range of compatible
devices such as
Digital video cameras
Hard disk drives
MO drives
CD-RW drives
NOTE: i.LINK uses a four-pin connector, which does not carry
electric current. External devices will need their own power supply.
Precautions
Make a backup of your data before transferring it to the computer. There is a
possibility that the original data will be damaged. There is a particular risk that
some frames will be deleted in the case of digital video transfer. TOSHIBA
assumes no liability for such loss of data.
Do not transfer data in areas where static electricity is easily generated or in
areas subjected to electronic noise. Data can be destroyed.
If you are transferring data through an IEEE1394 hub, do not connect or
disconnect other devices from the hub during data transfer. There is a likeli-
hood that data will be damaged. Connect all devices to the hub before you turn
on the computer’s power.
You may not use any copyrighted video or music data copied from a video
camera except for your personal enjoyment.