Toshiba M30 Manual Do Utilizador

Standby will not function under the following conditions:

❖

❖

❖

❖

❖

Power is turned back on immediately after shutting down.

❖

❖

❖

❖

❖

Memory circuits are exposed to static electricity or electrical noise.

Certain conditions require that you restart the system. For example, if:

❖

❖

❖

❖

❖

You change certain computer settings.

❖

❖

❖

❖

❖

An error occurs and the computer does not respond to your keyboard
commands.

There are three ways to restart the computer system:

1.

Click 

 then click 

. From the 

menu select 

.

2.

Press 

Ctrl + Alt + Del 

to display the 

, then

select 

 and 

.

3. Press the power button and hold it down for five seconds. Wait 10 to 15

seconds, then turn the power on again by pressing the power button.

If preinstalled files are damaged, use the Product Recovery CD-ROM to restore
them. To restore the operating system and all preinstalled software, follow the steps
below.

1. Load the Product Recovery CD-ROM in the optical media drive and turn off

the computer’s power.

2. Hold down the 

 key and turn on the power. When 

 appears, release the 

 key.

3. Use the up or down cursor key to select the 

 in the

 menu. For details, refer to the 

 section in

Chapter 7, HW Setup.

4. Follow the on-screen instructions.