Toshiba M30 Manual Do Utilizador
O
PERATING
B
ASICS
4-27
Wireless LAN
Security
❖
❖
❖
❖
❖
Be sure to enable the WEP (encryption) function to prevent unauthorized
access to your Wireless LAN. Such access can enable illegal intrusion into
data, eavesdropping and loss or destruction of data. TOSHIBA strongly
recommends that you enable the WEP function.
access to your Wireless LAN. Such access can enable illegal intrusion into
data, eavesdropping and loss or destruction of data. TOSHIBA strongly
recommends that you enable the WEP function.
❖
❖
❖
❖
❖
TOSHIBA is not liable for damage resulting from unauthorized access to a
Wireless LAN including, but not limited to, illegal intrusion, eavesdropping
and loss or destruction of data.
Wireless LAN including, but not limited to, illegal intrusion, eavesdropping
and loss or destruction of data.
Wireless communication switch
You can enable or disable the Wireless LAN function, with the on/off switch. No
transmissions are sent or received when the switch is off. Slide the switch toward
the back of the computer to turn it on and toward the front of the computer to turn it
off.
transmissions are sent or received when the switch is off. Slide the switch toward
the back of the computer to turn it on and toward the front of the computer to turn it
off.
CAUTIONS: 1. Set the switch to off in airplanes and hospitals. Check
the indicator. It will stop glowing when the wireless
communication function is off.
communication function is off.
2. Turn the computer off when you enter an airplane and
check the carrier’s regulations before you use a
computer on board.
computer on board.
Wireless communication indicator
The wireless communication indicator indicates the status of the wireless communi-
cation functions.
cation functions.
Indicator status Indication
Indicator off
Wireless communication switch is set to off.
Indicator glows
Wireless communication switch is on.
Wireless LAN is turned on by an application.
Wireless LAN is turned on by an application.
If you used the Task Bar to disable W-LAN, restart the computer or follow the
procedures below to enable the system to recognize W-LAN. Open or click the
following:
procedures below to enable the system to recognize W-LAN. Open or click the
following:
start
,
Control Panel
,
System
,
Hardware Device Manager
,
Network adapters
,
Intel
®
PRO/Wireless LAN 2100 3B Mini PCI Adapter
or
Intel
®
PRO/Wireless LAN 2100A 3B Mini PCI Adapter
or
Atheros
AR5001X+ Wireless Network Adapter
and
enable
.