Toshiba M507 Manual Do Utilizador

Página de 250
4  Replacement Procedures 
4.6  Wireless LAN card 
Removing the Wireless LAN card 
To remove the wireless LAN card, make sure the computer is in boot mode and powered 
off, follow the steps below and refer to Figures 4-9 to 4-10. 
NOTE:    The wireless LAN card is an option. 
CAUTION:  Do not try to remove the wireless LAN card with the computer turned 
on. The computer or the wireless LAN card can be damaged. Do not 
touch the connectors on the wireless LAN card module on the computer. 
Debris on the connectors may cause wireless LAN card access problems. 
1.  Loosen the screw (with an e-ring) and remove the Wireless LAN card cover. 
 
Figure 4-9    Remove Wireless LAN card cover 
2.  Remove one piece of tape and the following screw then the wireless antennas
M2
3L   FLAT 
HEAD 
screw 
  
2 
SatelliteM500/M500D Maintenance Manual [CONFIDENTIAL]                                                      4-23