Toshiba M30-35 Manual Do Utilizador

To check if the SD card/Smart Media slot is good or no good, follow the troubleshooting 
procedures below as instructed. 

Procedure 1:  Check on Windows 
Procedure 2:  Connector/Replacement Check 

Insert an SD card into the slot. Check if Windows recognizes automatically the SD card and 
the data in the SD card can be read. 

If the card is not recognized or data are not red, go to Procedure 2. 

The SD card is connected to IS2101 on the system board. 

 

Check 1  The SD card and the system board may be disconnected. Make sure the SD card is 

firmly inserted to IS2101 on the system board. If not, insert it firmly. If the SD 
card is still not functioning properly, perform Check 2. 

Check 2  The SD card may be faulty. Replace it with a new one following the step in 

Chapter 4. If the problem continues, perform Check 3. 

Check 3  The system board may be faulty. Replace it with a new one following the step in 

Chapter 4. 

Satellite M30-35 Maintenance Manual (960-455)