Toshiba M30-35 Manual Do Utilizador

This section describes how to perform the IEEE1394 test with the test program. 

Toshiba MS-DOS is required to run the DIAGNOSTICS TEST PROGRAM. To start the 
DIAGNOSTIC TEST PROGRAM, follow these steps: 

(a)  Insert the Diagnostics disk in the floppy disk drive and turn on the computer.  

(The Diagnostics Disk contains the MS-DOS boot files.) 

The following menu will appear: 

 

******************************************************************** 

*          XXXXX IEEE1394[XXXXX] Diagnostics program               * 

******************************************************************** 

*                                                                  * 

*          1 ....Transmit & Receive test                           * 

*                                                                  * 

*          2 ....Responder set                                     * 

*                                                                  * 

*          3 ....1394 GUID Display                                 * 

*                                                                  * 

******************************************************************** 

.... Press test number[1-3] ? 

(b)  To execute the TEST, select the test number you want to execute and press 

.  

Subtest 01 

Transmit & Receive test 

 

This program checks the data transporting between responder machine and 
target machine. 

Subtest 02 

Responder set 

 

This program initializes the machine responder. 

Subtest 03 

1394 GUID Display 

 

This program checks the GUID.