Toshiba M30-35 Manual Do Utilizador

To install the keyboard, follow the steps below and refer to figures 4-11 to 4-12. 

1.  Place the keyboard face down on the palm rest. 

2. Connect the keyboard cable to the connector PJ3200 on the system board. 

3. Place the keyboard support plate and secure it with the following screw. 

•  M2.5×8B  FLAT HEAD screw   

×1 

4.  Turn the keyboard face up and put it on the computer. Make sure that there is no gap 

between the keyboard and the computer. 

5. Place the keyboard hold plates on the keyboard. Then secure the keyboard hold 

plates and the keyboard with the following screws. 

•  M2×4B BIND 

screw    

×2 

Or 

•  M2×4   

LH STICK screw   

 

×2 

6. Install the keyboard brace by pressing it from the topside.