Toshiba M30-35 Manual Do Utilizador

To remove the system board, follow the steps below and refer to figures 4-26 and 4-27. 

1.  Peel off the glass tape and disconnect the RGB cable from the connector PJ5621 on 

the system board. 

2. Disconnect the speaker cables from the connectors PJ6003 (red) and PJ6004 (blue) 

on the system board. 

3. Disconnect the USB cable from the connector PJ7003 on the system board. 

4.  Peel off the glass tapes and disconnect the battery cable from the connector PJ8810 

and the network cable from the connector PJ4100on the system board. 

5. Disconnect the fan cable from the connector PJ8770 on the system board and the 

power cable from the connector CN3 on the power board. 

6.  Peel off the glass tape and disconnect the USB cable from the connector PJ7005 on 

the system board.(VRAM64 only) 

Glass tape

Glass tape

RGB cable

Speaker cable (blue)

Speaker cable (red)

USB cable

Fan cable

Battery cable

Network cable

Power cable

Glass tape

Glass tape

USB cable

*Case of the VRAM64 only