Toshiba M30-35 Manual Do Utilizador

To install the CPU, follow the steps below and refer to figures 4-28 to 4-30. 

1.  Make sure the cam is in the open position. 

2. Seat the CPU in the CPU socket. Make sure the position is exact to avoid damaging 

pins on the CPU. 

3. Fix the CPU by rotating the cam 180 degrees clockwise with a flat-blade 

screwdriver. 

4. Apply new grease on the CPU using a special syringe as shown in the following 

figure. Apply quarter of scale (0.25ml) of grease evenly on the CPU chip. When 
silicon grease is already applied to the CPU, wipe them off with a close in advance. 

 

5. Install the fin. 

6. Place the CPU holder and secure it with the following screws in the order of the 

number marked on the holder. 

•  M2×4B BIND 

screw    

×3