Toshiba M30-35 Manual Do Utilizador

4.26 LCD Module

4 Replacement Procedures

4.26 LCD

Module

NOTE: 1) Be careful not to apply pressure to the ICs along the edge of LCD module.

The ICs are easily damaged.

2) For environmental reasons, do not throw away a malfunctioning LCD module

(or FL). Please follow local ordinances or regulations for its disposal.

Removing the LCD Module

To remove the LCD Module, follow the steps below and refer to figures 4-40 and 4-41.

1. Remove the four mask seals on the sides of the LCD module.

2. Remove the following screws securing the LCD module.

• M2×4B S-FLAT HEAD screw

×4

3. With the bottom edge of the LCD unit on the display cover, lift the top edge of the

LCD unit.

4. Remove the copper tape securing the LCD cable.

Satellite M30-35 Maintenance Manual (960-455)

4-65