Toshiba M30-35 Manual Do Utilizador

The computer’s HDD is formatted using the low level format program and the MS-DOS 
FORMAT program. To format the HDD, start with Check 1 below and perform the other 
steps as required. 

Check 1  Format the HDD and transfer system files using FORMAT C:/S/U. If the 

following message appears on the display, the HDD is formatted. 

Format complete 

If an error message appears on the display, refer to the Toshiba MS-DOS Manual 
for more information and perform Check 2. 

Check 2  Using the Diagnostics Disk, format the HDD with a low level format option. 

Refer to Chapter 3, Tests and Diagnostics for more information about the 
diagnostic program. 

If the following message appears on the display, the HDD low level format is 
complete. Partition and format the HDD using the MS-DOS FORMAT command.  

Format complete 

If you cannot format the HDD using the Tests and Diagnostic program, go to 
Procedure 4. 

Satellite M30-35 Maintenance Manual (960-455)