Toshiba M30-35 Manual Do Utilizador

This section describes how to determine if the Optical Drive is functioning properly. Perform 
the steps below starting with Procedure 1 and continue with the other procedures as required. 

Procedure 1:  Diagnostic Test Program Execution Check 
Procedure 2:  Connector Check and Replacement Check 

The CD-ROM/DVD-ROM test program is stored in the Diagnostics Disk. 

For the test, prepare a test CD-ROM, DVD-ROM, music CD and CD-RW Media. 

Then insert the Diagnostics Disk in the computer’s floppy disk drive, turn on the computer 
and run the test. Refer to Chapter 3, Tests and Diagnostics, for more information about the 
diagnostics test procedures. 

If any errors occur while executing the CD-ROM/DVD-ROM test, go to Procedure 2. 

Satellite M30-35 Maintenance Manual (960-455)