Toshiba M505 Manual Do Utilizador

4 Replacement Procedures

4. Pull the tab of the HDD assembly to remove it from the connector of the HDD

cable. Be careful not to damage the connector.

Figure 4-4 Removing 4 screws securing HDD assembly

NOTE: The following steps describe how to disassemble the HDD assembly,

however, do not disassemble if the HDD is working properly.

5. Place the HDD assembly on a flat surface, remove the HDD connector and then

remove the following screws.

4L FLAT HEAD screw

4

Figure 4-5 Removing the HDD connector

4-18 [CONFIDENTIAL]

SatelliteM500/M500D Maintenance Manual