Toshiba M505 Manual Do Utilizador
4 Replacement Procedures
4.19 VGA Card
Removing the VGA Card
To remove the VGA card, follow the steps below and refer to Figures 4-42.
1. Remove the following screws securing the VGA.
M2
3L
FLAT HEAD screw
2
2. Remove the VGA Card from the slot at the pop-up angle
Figure 4-42 Removing screws securing VGA Card
Install the VGA Card.
To install the VGA Card, follow the steps below and refer to Figures 4-42.
1. Insert the VGA Card into connector at an angle about 45
2. Secure the VGA Card with the following screws.
M2
3L
FLAT HEAD screw
2
4-56 [CONFIDENTIAL]
SatelliteM500/M500D Maintenance Manual