Toshiba M505 Manual Do Utilizador
3 Tests and Diagnostics
3.0.2 Executing the Diagnostic Test
To start the Test PROGRAM on CD-ROM, follow these steps:
1. Burn the test program ISO image to an optical media disk.
2. Insert the optical media disk with the test program into optical device.
3. Turn on the power, and choose boot from optical device.
4. System will automatically run the test program and display the test menu.
5. When the test menu displays, please enter the item number to choose and execute the
test item.
Note:
Please make sure to set test PC SATA Controller Mode to “Compatibility” in BIOS and set
SATA Controller Mode to “ACHI” after test.
SATA Controller Mode to “ACHI” after test.
If it fails in a test item, press “Ctrl+C” and “Y” back to main menu.
Satellite M500/M505/M507/M500D/M505D/M507D Maintenance Manual [CONFIDENTIAL] 3-5