Toshiba PROL450D Manual Do Utilizador

Install the motherboard according to the following procedures. 

1.  Before seat the motherboard on the logic lower assembly, pull out the USB FFC to avoid 

being pressed. 

2.  Align the VGA CONN and RJ45 CONN to the holes in the logic lower assembly as shown in 

Figure 4.22. 

 

3.  Align the Audio CONN to the holes in the logic lower assembly and push the motherboard 

downward. Make sure the SPDIF & Audio CONN fit the holes. 

 

4.  Put the DC_IN CONN in the lower DC_IN trough and route the cable from left to right under 

the routing channel as shown in Figure 4.24.