Toshiba PROL450D Manual Do Utilizador

Remove the USB board according to the following procedures and Figure 4.42. 

1.  Remove one M2.5x3 screw that secures the USB board to the logic lower assembly. 

2.  Remove the USB board from the logic lower assembly. 

 

 

M2.5×3*1 

 

Install the USB board according to the following procedures. 

1.  Seat the USB board in the correct position on the logic lower assembly. 

2.  Secure the USB board to the logic lower assembly with one M2.5x3 screw.