Toshiba PROL450D Manual Do Utilizador

                                                                    

 26

 

 

Figure 2-8 outlines the process. Perform the steps below starting with Procedure 1 and 
continue with the other procedures as required. 

 

Procedure 1:  Audio CD test 
Procedure 2:  Drive cleaning check 
Procedure 3:  Software check 
Procedure 4:  Diagnostic test 
Procedure 5:  Connection and replacement check 

First, insert an audio CD into the CD/DVD drive. If it works, the problem is not with the 
drive. Go to Procedure 3. If the audio CD does not work, go to Procedure 2. If the CD/DVD 
LED on the front panel does not light when the disc is played and the drive gives no response, 
go straight to Procedure 3. 

Insert a CD/DVD drive-cleaning disk into the drive clean according to the drive-cleaning 
product instructions. If the problem persists, go to Procedure 3. 

Ensure that the appropriate driver has been installed on the computer for the CD/DVD drive. 

The audio test program stored in the Diagnostics Disk will test the drive’s ability to play an 
audio CD. See Chapter 3 for details. 

If any errors occur while executing the diagnostic program, go to Procedure 5.