Toshiba PROL450D Manual Do Utilizador

                                                                    

 33

 

The Camera board or system board may be the reason of a Camera fault. Either of these two 

components may be damaged. To determine if the computer’s Camera is functioning 

properly, perform the following procedures. Figure 2-11 outlines the process. Start with 

Procedure 1 and continue with the other procedures as instructed. 

Procedure 1:  Diagnostic test 
Procedure 2:  Connector and replacement check 

Run the functioning Program in windows, which will display the Camera test result. 

If tests and diagnostics result abnormal go to Procedure 2. If an error is not located, the 
Camera system is functioning properly. 

 

The Camera board or system board may be disconnected or damaged.  Disassemble the 
computer following the steps described in Chapter 4, Replacement Procedures, and perform 
the following checks. 

 

Check 1 

Make sure that the Camera board FFC is securely slotted into the system board. If 
the problem persists, go to Check 2. 

Check 2 

The Camera board may be damaged. Replace it with a new one following the 
instructions in Chapter 4. If the problem still exists, perform Check 3. 

Check 3 

The system board may be damaged.  Replace it with a new one following the 
instructions in Chapter 4.