Toshiba PX30t Manual Do Utilizador
Problem
Procedure
Memory media card
error occurs
error occurs
Remove the memory media card from the
computer and then reinsert it in order to ensure it is
firmly connected.
If the problem persists, then you should refer to the
documentation supplied with your memory media
card for further information.
computer and then reinsert it in order to ensure it is
firmly connected.
If the problem persists, then you should refer to the
documentation supplied with your memory media
card for further information.
You cannot write to
a memory media
card
a memory media
card
Remove the memory media card from the
computer and check to ensure that it is not write
protected.
computer and check to ensure that it is not write
protected.
You cannot read a
file
file
Check to ensure the required file is actually on the
memory media card that is inserted into the
computer.
If you are still unable to resolve the problem,
contact TOSHIBA Support.
memory media card that is inserted into the
computer.
If you are still unable to resolve the problem,
contact TOSHIBA Support.
Pointing device
If you are using a USB mouse, you should also refer to both the
USB mouse
Problem
Procedure
On-screen pointer
does not respond to
mouse operation
does not respond to
mouse operation
In this instance the system might be busy - Try
moving the mouse again after waiting a short
while.
moving the mouse again after waiting a short
while.
Remove the mouse from the computer and then
reconnect it to a free USB port in order to ensure it
is firmly attached.
reconnect it to a free USB port in order to ensure it
is firmly attached.
Double-clicking does
not work
not work
In this instance, you should initially try changing
the double-click speed setting within the Mouse
Control utility.
1.
the double-click speed setting within the Mouse
Control utility.
1.
To access this utility, click Desktop ->
Desktop Assist -> Control Panel ->
Hardware and Sound -> Mouse.
Desktop Assist -> Control Panel ->
Hardware and Sound -> Mouse.
2.
Within the Mouse Properties window, click the
Buttons tab.
Buttons tab.
3.
Set the double-click speed as required and
click OK.
click OK.
User's Manual
6-8