Toshiba PSAGRX Manual Do Utilizador

4 Replacement Procedures

4.2 HDD

4. Remove the HDD pack by pulling on the tab attached to the pack, following the
direction of the arrows.

NOTE: Do not disassemble the HDD pack when it is working normally. Disassemble
or replace the HDD pack only if it fails.

5. Place the HDD pack on a flat surface (such as a desk), and remove the four M3x3.5

black flat head screws.

6. Place the HDD pack on a flat surface (such as a desk), and remove the chassis.

M3x

black flat head screw

3.5

Second HDD chassis

Second HDD

M2x3 black flat head screw

M3x

black flat head screw

3.5

Figure 4-11 Removing the HDD chassis

CAUTION: Do not apply pressure to the top or bottom of the drive.

4-18

Satellite M200/M205 / Satellite Pro M200/ EQUIUM M200/ SATEGO M200

Maintenance Manual