Toshiba S4 Manual Do Utilizador
2 Troubleshooting Procedures
2.15 Bluetooth Troubleshooting
2-60
[CONFIDENTIAL]
TECRA S3 Maintenance Manual (960-532)
2.15 Bluetooth Troubleshooting
To check if the Bluetooth is malfunctioning or not, follow the troubleshooting procedures
below as instructed.
below as instructed.
Procedure 1: Transmitting-Receiving Check
Procedure 2: Antenna Connection Check
Procedure 3: Replacement Check
Procedure 2: Antenna Connection Check
Procedure 3: Replacement Check
Procedure 1
Transmitting-Receiving Check
Before starting the test, make sure the wireless communication switch is set in the “ON”
position.
position.
Check 1
Execute the Bluetooth test program as part of the LAN/Modem/ Bluetooth/
IEEE1394 test program to check the transmitting-receiving function of Bluetooth.
You will need a second computer that can communicate by Bluetooth. Perform
the test following the instructions described in Chapter 3 Tests and Diagnostics.
If the computer passes the test, the function is correctly working. If the computer
does not pass the test, perform Procedure 2.
IEEE1394 test program to check the transmitting-receiving function of Bluetooth.
You will need a second computer that can communicate by Bluetooth. Perform
the test following the instructions described in Chapter 3 Tests and Diagnostics.
If the computer passes the test, the function is correctly working. If the computer
does not pass the test, perform Procedure 2.