Toshiba S4 Manual Do Utilizador

To remove the SR board/DC-IN jack, follow the steps below and refer to Figure 4-27.

1.  Remove the following screw and take out the SR board from the slot.

•  M2.5×6S Tapping screw

×1

2.  Disconnect the SR/USB cable from the connector CN9510 on the SR board.

3.  Remove the following screw and serial harness holder.

•  M2.5×6S Tapping screw

×1

4.  Disconnect the SR/USB cable from the connectors CN3421 and CN4611 on the

system board.

5.  Take out the DC-IN jack from the slot and disconnect the DC-IN jack cable from

the connector CN8800 on the system board.

Serial harness holder

M2.5

×6S Tapping

CN9510

CN6050

SR board

M2.5

×6S Tapping

DC-IN jack

CN8800

CN3421

CN4611