Toshiba PSAGVX Manual Do Utilizador

‹ The error list of each test module is displayed at the lower right corner of the screen. It 

would display the total error quantity found in the test, the most recent five error codes 
and description would be shown here. Detailed error report could be viewed with 
Logview.exe. 

‹  When pressing ESC key during the test process, a User Break Windows will be popped 

up for the user to select.  

Pressing ESC key to interrupt the test, USER BREAK message box would be prompted out 
in the central of Diagnostics Window for the user to select the following actions: 

‹ CONTINUE---- Continue the test; 

‹ SKIP---- Stop the sub-item of current test item to go to the next item’s test; 

‹ ABORT----Stop the current test item to test the next module. 

‹ ABORT ALL---- Stop all the selected test items. User could use the hot key Ctrl+D to 

achieve the same operation. When the user calls ABORT ALL, the following message 
box will prompt for his selecting. 

 

Title Bar located at the top of the window, it includes information as follows: 

‹ Program Name and Its Version: Service Diagnostic Ver1.10; 

‹  Test Module Name: Label the name and version of the test module. For example, in the 

above screen, the name of the test module is ‘Memory Tester Build Date 200

7.02.09’.  

‹ Status Bar: Located at the bottom of the screen as follows: 

 

The status bar is used to indicate the current script setting and test status. It consists of two 
lines that includes the information as follows: 

‹ Test Mode: TIMEBOUND or LOOPBOUND, e.g. LOOPBOUND in the above screen; 

Satellite A300,Satellite Pro A300, EQUIUM A300,SATEGO A300 Maintenance Manual