Toshiba Satellite/Satellite PRO T230D SERIES Manual Do Utilizador

Remove the USB & Audio Board according to the following procedures and Figure 4.24. 

1.  Disconnect the FFC from the motherboard and peel it off the logic lower assembly. 

2.  Remove the two M2x3 screws and remove the USB & Audio board from the logic lower 

assembly. 

 

M2×3*2 

 

Install the USB & Audio Board according to the following procedures. 

1.  Seat the USB & Audio board in the correct position on the logic lower assembly and secure 

it with two M2x3 screws. 

2.  Adhere the FFC to the logic lower assembly and connect it to the motherboard.