Toshiba Satellite/Satellite PRO T230D SERIES Manual Do Utilizador

Remove the LED Board according to the following procedures and Figure 4.27. 

1.  Disconnect the LED cable from the motherboard and pull it out of the routing channel. 

2.  Pry the fixing ribs outward as indicated in Figure 4.27 and remove the LED board from the 

logic lower assembly. 

 

 

Install the LED Board according to the following procedures. 

1.  Seat the LED board in the correct position on the logic lower assembly. Make sure that it is 

secured by the fixing ribs. 

2.  Route the LED cable in the routing channel and connect it to the motherboard.