Toshiba SATELLITE E105 Manual Do Utilizador

Error! Style not defined. Error! Style not defined.

4 Replacement Procedures

4.6 HDD

Removing the HDD

CAUTION: Do not press on the top or bottom of the drive.
Applying such pressure can either corrupt the data in the drive or
damage the drive.

Remove the HDD (hard disk drive) according to the following procedures and Figures 4-11,
4-12.

1. Release the three M2x4 black flat screws securing the HDD.

2. Pull out the HDD, following the direction of the arrow.

M2x4 black flat head screw

cable

grounding

wire

Figure 4-11 Removing the HDD pack

NOTE: Do not disassemble the HDD pack when it is working normally. Disassemble
or replace the HDD pack only if it fails.

3. Place the HDD pack on a flat surface (such as a desk), and remove the four M3x3.5

black flat head screws.

4. Place the HDD pack on a flat surface (such as a desk), and remove the chassis.

Satellite E100/E105/ Satellite ProE100/E105

Maintenance Manual

4-21