Toshiba SATELLITE E105 Manual Do Utilizador

Removing the Display Mask 

Remove the display mask according to the following procedures and Figure 4-28.  

1.  Remove the following 4 seals on the display module in that order: 

- Two gray seals on the bottom  
- Two gray seals on the top 

2.  Remove the following 4 screws on the display module, in that order: 

- Two M2.5x4 black flat head screws on the top  
- Two M2.5x4 black flat head screws on bottom 

3.  Release the following 19 latches on the display mask, in that order : 

- Four latches on the left side 
- Four latches on the top side. 
- Four latches on the right side. 

 - Seven latches on the bottom side  
 
 

M2 5x4 black flat head screw

.

M2 5x4 black flat head screw

.

Seal

Dispaly mask

Seal