Toshiba PRO L600 Manual Do Utilizador

Página de 281
Chapter 4 Replacement Procedures  
4.3 HDD/SSD 
Removing a HDD/SSD-H9.5mm 
The following describes the procedure for removing the HDD/SSD (See Figure 4-3-1 to 4-3-
3). 
CAUTION:  Take care not to press on the top or bottom of a HDD/SSD. Pressure may 
cause data loss or damage to the device. 
1.  Turn the computer upside down. 
2.  Remove the following screws securing a HDD/SSD slot cover  
M2.0
4.0B   
 BIND screw    
 
x2 
3.  Remove the following screws securing the HDD/SSD assembly
  M3.03.0B   
FLAT BIND screw   
x2 
4.  Disconnect the HDD/SSD assembly from the connector on the mother board. 
MAIN HDD OR SSD 
 
 Figure 4-3-1
 Turn 
the computer upside down  
Satellite L640/L645, Satellite Pro L640/Pro L645 Maintenance Manual (960-Q08)