Toshiba PRO L645 Manual Do Utilizador

The following describes the procedure for removing the LCD unit (See Figure 4-14-1 to 4-
14-3). 

1. Remove Screw Mylar cover 

2. Remove the following screws securing the display mask 

M 2.5

5.0 

screw        x4 

3. Insert your finger between the edge of the display mask and the LCD, and remove the 
display mask while releasing the latches of display mask. (Note: when removing the 
display mask, please first remove from top side to the bottom in order to lessen the 
degree of breaking. 

 

M2.5

5.0 4pcs 

4. Remove the following screws securing the LCD unit. 

  M2.5x5.0 

screw 

  x4 

5.  With the bottom edge of the LCD unit on the display cover, lift only the top edge of 

the LCD unit. After peeling off the kapton tape, disconnect the LCD harness from the 
connector on the back of the LCD.  

6.  Remove the LCD unit.