Toshiba S500M Manual Do Utilizador

If the CPU supports Gerserville (SpeedStep), this Subtest checks that the CPU 
operating clock speed can be changed. 

If the CPU does not support Gerserville (SpeedStep), the following message is 
displayed and the test is ended. 

This chip is not supported 

Subtest 04 

Quick Charge 

This subtest checks the status for the quick charge. 

Subtest 05 

DMI read 

This subtest displays the information in the Flash-ROM in the following 
format. 

*** DMI Data Display Ver X.XX *** 

Model 

Name 

  : 

XXXXXXXXXXX 

Version Number 

: XXXXXXXXXXXX 

Serial Number  

: XXXXXXXX 

UUID Number 

 

: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX 

Model Number   

: XXXXXX-XXXXX 

PCN/BND Number 

: XXXXXXXXXX 

Press [Enter] to EXIT 

To exit this subtest and return to the SYSTEM test menu, press 
Enter

.Memory Test 

To execute the Memory Test, select 2 from the DIAGNOSTIC TEST MENU, press Enter 
and follow the directions on the screen. Move the highlight bar to the subtest you want to 
execute and press Enter. 

Subtest 01 

Conventional memory 

This subtest writes a constant data to conventional memory (0 to 640 KB), 
then reads the new data and compares the result with the original data.  

Subtest 02 

Protected Mode  

This subtest writes constant data and address data (from 1MB to maximum 
MB), and reads the new data and compares the result with the original data.  

Subtest 03 

Cache memory (on/off)