Toshiba TECRA S1 Manual Do Utilizador

Check 3 

The FL may be faulty.  Replace it with a new one and return to Procedure 3.  If 
there is still an error, perform Check 4. 

Check 4 

The FL inverter board may be faulty.  Replace it with a new one and return to 
Procedure 3.  If there is still an error, perform Check 5. 

Check 5 

Make sure the LCD/FL cable has been firmly connected to the system board 
and LCD module. 

FL inverter board

System board

CPU

LCD/FL cable

 

 

 

If the cable is loose or off, reconnect it firmly and return to Procedure 3.  If 
there is still an error, perform Check 6. 

Check 6 

The LCD/FL inverter cable may be faulty.  Replace it with a new one and 
return to Procedure 3.  If there is still an error, perform Check 7. 

Check 7 

The LCD module may be faulty.  Replace it with a new one and return to 
Procedure 3.  If there is still an error, perform Check 8. 

Check 8 

The System board may be faulty.  Replace it with a new one.  If there is still an 
error, perform Check 9. 

Check 9 

The CPU may be faulty.  Replace it with a new one following the instructions 
in Chapter 4. 

Check 10 

The memory may be defective. Replace the memory module with a new one 
following the steps described in Chapter 4. If the problem persist, perform 
Check 10.