Toshiba PRO T215 Manual Do Utilizador

Remove the RGB board according to the following procedures and Figure 4.27: 

1.  Disconnect the RGB board cable and remove one M2x3 screw securing the RGB board to the 

logic lower assembly, as shown in Figure 4.27. 

2.  Lift the RGB board at an angle and then remove it from the logic lower assembly. Take care 

to disengage the connectors from their respective ports without damaging them.  

M2x3 

 

 

Install the RGB board according to the following procedure: 

1.  Insert the RGB board into the logic lower assembly at an angle and then press it down to seat 

it on the logic lower assembly. 

2.  Connect the RGB board FFC to the motherboard.