Toshiba PQF46X Manual Do Utilizador
4.2 HDD
4 Replacement Procedures
3. Remove the HDD and 2
nd
HDD pack by pulling on the tab attached to the pack,
following the direction of the arrows.
NOTE: Do not disassemble the HDD pack when it is working normally. Disassemble
or replace the HDD pack only if it fails.
or replace the HDD pack only if it fails.
4. Place the HDD pack on a flat surface (such as a desk), and remove the two M3x4
black flat head screws with M3x4 black head screws.
5. Place the HDD pack on a flat surface (such as a desk), and remove the chassis.
M3x4 black
flat head screw
flat head screw
HDD Chassis
HDD
M3x4 black
flat head screw
flat head screw
Figure 4-7 Removing the HDD chassis
CAUTION: Do not apply pressure to the top or bottom of the drive.
Qosmio F40/F45 Maintenance Manual
4-19