Toshiba X205 Manual Do Utilizador
4.23 VGA Board
4 Replacement Procedures
4.21 VGA PCB
Removing the VGA PCB
To remove the VGA PCB, first remove the battery pack, keyboard, display assembly, and top
cover, then follow the steps below:
cover, then follow the steps below:
1.
Disconnect the VGA PCB wire cable from the system board.
Figure 4-62
Removing the VGA PCB FFC cable
2.
Remove the M2x6 screw securing the VGA PCB. Then remove the two hexagonal VGA
screws from the left side of the computer.
screws from the left side of the computer.
Figure 4-63
Removing the VGA PCB screw and the hexagonal screws
Satellite X200/ X205 Series Maintenance Manual
[CONFIDENTIAL]
4-53