Toshiba L310 Manual Do Utilizador

6-8

User’s Manual

Power and Power-Up Modes

6. Be sure to monitor the remaining battery power. If the battery pack and 

real time clock battery discharge completely, Sleep Mode will not 

function and data in memory will be lost. Also, the computer might 

register an incorrect time and date. In this case, connect the 

AC adaptor to recharge the batteries. 

7. Never install or remove the battery pack without first turning off the 

power and disconnecting the AC adaptor. Never remove the battery 

pack while the computer is in Suspend or Sleep Mode. Data will be lost. 

1. Never remove the battery pack while the Wake-up on LAN function is 

enabled. Data will be lost. Before you remove a battery pack, disable 

the Wake-up on LAN function. 

2. After the battery pack is charged, avoid leaving the AC adaptor 

connected and the computer turned off for more than a few hours at a 

time. Continuing to charge a fully-charged battery pack can damage the 

battery. 

Charging the batteries

When the power in the battery pack becomes low, the Battery indicator 

flashes orange indicating that only a few minutes of battery power remain. 

If you continue to use the computer while the Battery indicator flashes, the 

computer enables Hibernation Mode (so you don't lose data) and 

automatically turns off. 
You must recharge a battery pack when it becomes discharged. 

To recharge a battery pack while it is installed in the computer, connect the 

AC adaptor to the DC IN 19V jack and plug the other end into a working 

outlet. 
The Battery indicator glows orange when the battery is being charged.