Toshiba 960-809 Manual Do Utilizador

This section describes how to determine if the computer's Bridge media functions are 
functioning properly. Perform the steps below starting with Procedure 1 and continuing with 
the other procedures as required. 

Procedure 1:  Check on Windows OS 
Procedure 2:  Connector Check and Replacement Check 

Insert a Bridge media (SD memory card/SDIO card/Memory stick/Memory stick Pro/ 
xD Picture card/Multimedia card) into the slot. Check if the installed Windows recognizes 
automatically the Bridge media and the data in the Bridge media can be read. 

If the card is not recognized or data are not red, go to Procedure 2. 

The Bridge media is connected to IS2140 on the system board. 

Bridge media supports SD memory card/SDIO card/Memory stick/Memory stick Pro/ 
xD Picture card/Multimedia card. 

 

Check 1  Bridge media and system board may be disconnected. Make sure the Bridge media 

is firmly inserted to IS2140 on the system board. If not, insert it firmly. If the 
Bridge media is still not functioning properly, perform Check 2. 

Check 2  Bridge media may be faulty. Replace it with a new one following the step in 

Chapter 4 Replacement Procedures. If the problem continues, perform Check 3. 

Check 3  System board may be faulty. Replace it with a new one following the step in 

Chapter 4 Replacement Procedures.