Toshiba 960-809 Manual Do Utilizador

4  

Replacement 

Procedures 

This chapter describes the procedure for removing and replacing the field replaceable units 
(FRUs) in the PC. It may not be necessary to remove all the FRUs in order to replace one.  
The chart below provides a guide as to which other FRUs must be removed before a 
particular FRU can be removed. The numbers in the chart indicate the relevant section 
numbers in this manual. 

In all cases when removing an FRU, the battery pack must also be removed. When repairing 
an FRU that is the potential cause of a computer fault, use the chart to determine the order in 
which FRUs need to be removed. 

 

Chart Notation 

The chart shows the case 
for the following example: 

 Removing the Base 

assembly and cover 
assembly 

All FRUs down to the “4.2 
Battery pack” to “4.12 
Wireless LAN card/Robson 
card” above a 4.13 Base 
assembly and cover 
assembly must be 
removed.