Toshiba 960-809 Manual Do Utilizador

4.27 Sensor board

4 Replacement Procedures

4.27 Sensor board

Removing the Sensor board

The following describes the procedure for removing the sensor board. (See Figure 4-43.)

1. Remove the sensor board from the slot.

2. Disconnect the sensor cable from the connector on the sensor board.

Sensor board

Sensor cable

Guide

Hole

Figure 4-43 Removing the sensor board

Installing the Sensor board

The following describes the procedure for installing the sensor board. (See Figure 4-43.)

1. Connect the sensor cable to the connector on the sensor board.

CAUTION: Connect the connecter on which the acetate tape is not wrapped to the

sensor board. The connector on which the acetate tape is wrapped is
connected to the system board. Be careful not to connect the connectors
oppositely.

2. Install the sensor board to the slot while inserting the hole into the guide.

PORTÉGÉ M780 Maintenance Manual (960-809)

[CONFIDENTIAL]

4-69