Toshiba 960-809 Manual Do Utilizador

The following describes the procedure for removing the switch board/fingerprint sensor 
board. (See Figure 4-56.) 

1.  Remove the following screw securing the switch board and pull up the switch board. 

  M2.54.0B   

FLAT HEAD screw   

 

1 

2.  Disconnect the switch cable from the connector on the back of the switch board. 

3.  Remove the following screw securing the fingerprint sensor board and pull up the 

fingerprint sensor board. 

  M2.54.0B   

FLAT HEAD screw   

 

1  

4.  Disconnect the fingerprint sensor cable from the connector on the back of the 

fingerprint sensor board. 

 

M2.5x4.0B FLAT HEAD 

Fingerprint sensor board 

Fingerprint  

sensor cable

Switch board

Switch cable 

M2.5x4.0B FLAT HEAD