Toshiba 960-809 Manual Do Utilizador

The SATA HDD may be disconnected, or the SATA HDD or system board may be damaged. 
Disassemble the computer following the steps described in Chapter 4, Replacement 
Procedures and perform the following checks: 

Check 1 

Make sure the SATA HDD is firmly connected to CN1900 on the system  
board. 

 

If any of the connections are loose, reconnect firmly and repeat Procedure 1. If 
there is still an error, go to Check 2. 

Check 2  The SATA HDD may be damaged. Replace it with a new one following the 

instructions in Chapter 4, Replacement Procedures and check the operation. If the 
problem still exists, perform Check 3. 

Check 3  System board may be faulty. Replace it with a new one following the instructions 

in Chapter 4, Replacement Procedures