Toshiba A1 Manual Do Utilizador
4 Replacement Procedures
4.1 Overview
Screw Tightening Torque
Use the following torque when tightening screws.
CAUTION: Overtightening may damage screws or parts. Undertightening may allow
screws to loosen (and possibly fall out) causing a short circuit or other damage.
NOTE: To tighten screws quickly and accurately, an electric screwdriver is
recommended.
recommended.
M2 (2mm)
0.167 N∙m (1.7 kgf∙cm)
M2.5 (2.5mm)
0.294 N∙m(3.0 kgf∙cm)
M3 (3mm)
0.549 N∙m(5.6 kgf∙cm)
NOTE: To prevent damage to THIN HEAD screws, press along the axis of the
screwdriver while turning the screw. This is because the contact area between
the screw and driver is less than for a pan head screw (standard pan-shaped
screw head).
the screw and driver is less than for a pan head screw (standard pan-shaped
screw head).
Grip Color
Some screws have a colored grip area to help you determine the length of the screw.
Grip area
Even numbered length screws: Brown
Odd numbered length screws: White
Special length screw: Blue
Odd numbered length screws: White
Special length screw: Blue
“Special length screw” means screws whose length is indicated in an integral number to the
first decimal places such as 2.5 mm, 2.8 mm and so on.
first decimal places such as 2.5 mm, 2.8 mm and so on.
4-6
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)