Toshiba A1 Manual Do Utilizador
4 Replacement Procedures
4.7 Fan Module/Cooling Fin/CPU
4.7 Fan
Module/Cooling
Fin/CPU
NOTE: If silicon grease has already been applied to the CPU and fan module, wipe
clean with a cloth and apply new silicon grease. The computer will not operate correctly
if the CPU is not firmly in contact with the fan module.
clean with a cloth and apply new silicon grease. The computer will not operate correctly
if the CPU is not firmly in contact with the fan module.
Removing the Fan Module/Cooling Fin/CPU
The following describes the procedure for removing the fan module/cooling fin/CPU (See
Figure 4-12 to 4-16).
Figure 4-12 to 4-16).
1. Remove the following screws fixing the CPU cover and remove the CPU cover.
• M2.5x5
THIN BIND screw
x2
• M2.5x16
THIN BIND screw
x1
M2.5x5 THIN BIND
M2.5x16 THIN BIND
CPU Cover
Figure 4-12 Removing CPU Cover
4-22
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)