Toshiba A1 Manual Do Utilizador

The following describes the procedure for installing the display assembly (See Figure 4-24 to 
4-26). 

1.  Close the display and install the display assembly on the base assembly from the rear 

of the computer. 

2.  (For wireless LAN models only) 

Pass the wireless LAN cables through the slot and hook the cables on the guides. 

3.  Secure the following screws to fix the bottom and rear of the computer.  

•  M2.5x5   

THIN BIND screw   

x7 

•  M2.5x16   

THIN BIND screw   

x13 

4.  Turn the computer face up and open the display. 

5.  Turn up the insulator covering the speaker connectors and connect the speaker cables 

(Blue, Red) to PJ6000 and PJ6001 on the system board respectively. Insert the 
insulator inside the chassis. 

6.  Connect the LCD cable to PJ5600 on the system board.