Toshiba A1 Manual Do Utilizador

Página de 417
4  Replacement Procedures  
4.18 Fluorescent Lamp 
Assembling PCB-assembly cell 
1.  Remove the paper (coated with a mold release) from the double-sided tape in the 
three areas on the replacement backlight unit. The areas are at the top and on both 
sides. See Figure 4-52. 
2.  Turn the backlight on. 
3.  Check that the backlight is free of dust, foreign objects, or damage. Perform this 
check also for the reverse side of the cell. Then install the cell of the PCB assembly in 
the backlight unit. 
CAUTION:  Align the top left corner of the cell with the corresponding corner of the 
backlight unit, as indicated by 
 in Figure 4-52. 
Be careful not to damage the TAB. 
 
2
1
両面テープ剥離紙とる:3箇所
左上突き当て
PCB付きセル
バックライト
Cell of PCB
Backlight
Align the top left
corner.
Remove the paper on the double-side tape (three locations).
 
Figure 4- 52  Replacing 14 Inch TMD fluorescent lamp (8) 
4-72 
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)