Toshiba A1 Manual Do Utilizador

The following describes the procedure for replacing the fluorescent lamp (See Figure 4-82 to 
Figure 4-89). 

Removing the tape and cover shield 

1.  Remove the adhesive tape fixing the B/L cable (1). Be careful not to apply excessive 

force to the B/L cable. 

2.  Remove the adhesive tape (Yupo paper) fixing the top case (2). 

3.  Remove the cover shield (C) (3). Be careful not to apply excessive force to the LCD 

controller. Wear anti-static gloves as much as possible to prevent circuit damage 
caused by ESC. 

4.  Remove the cover shield (G) (4). Be careful not to apply excessive force to the TCP. 

5.  Remove the adhesive tape fixing the top case (5, 6). During this step, be careful not to 

apply excessive force to the top case.