Toshiba A1 Manual Do Utilizador

If the diagnostics program cannot detect an error, the problem may be intermittent. The Test 
program should be executed several times to isolate the problem. Check the Log Utilities 
function to confirm which diagnostic test detected an error(s), then perform the appropriate 
troubleshooting procedures as follows:  

1.  If an error is detected on the system test, memory test, display test, CD-ROM/DVD-

ROM test, printer test, Async test, expansion test, real timer test or 
Sound/Modem/LAN test, perform the System Board Troubleshooting Procedures in 
Section 2.4. 

2.  If an error is detected on the floppy disk test, perform the FDD Troubleshooting 

Procedures in Section 2.5. 

3.  If an error is detected on the hard disk test, perform the HDD Troubleshooting 

Procedures in Section 2.6. 

4.  If an error is detected on the keyboard test, perform the Keyboard Troubleshooting 

Procedures in Section 2.7. 

5.  If an error is detected on the display test, perform the Display Troubleshooting 

Procedures in Section 2.8.