Toshiba A1 Manual Do Utilizador

The HDD is connected to the connector of the system board. The connecting portion may be 
disconnected. Disassemble the computer following the steps described in Chapter 4, 
Replacement Procedures and perform the following checks to check the connecting portion: 

Check 1  Make sure the following connectors are firmly connected to the system board. 

System Board

 

If the connection is loose, reconnect firmly and repeat Procedure 1. If there is still 
an error, go to Check 2. 

Check 2  The 2.5” HDD may be damaged. Replace it with a new one following the 

instructions in Chapter 4, Replacement Procedures and check the operation. If the 
problem still exists, perform Check 3. 

Check 3  The system board may be damaged. Replace it with a new one following the 

instructions in Chapter 4, Replacement Procedures.