Toshiba A500D/PRO A500DPRO A500D Manual Do Utilizador

For your safety and that of other people in the working environment, it is strongly recommended 
that you use electrostatic discharge (ESD) equipment. The proper use of this equipment will 
ensure successful repair work and reduce the costs for repairing damaged components. The 
equipment and tools required for disassembly and reassembly are: 

  One 2 mm Phillips screwdriver 
  One 4 mm flat-blade screwdriver 
  Torx screwdriver 
  Tweezers (for pulling out screws) 
  ESD mats (for the floor and work desks) 
  An ESD wrist strap or heel grounder 
  Anti-static carpets or flooring 
  Air ionizers (for highly electrostatic sensitive areas) 
  A plastic card (in credit card size) 

 

To secure screws, follow the torque values listed below. Over-tightening can damage 
components and screws. Under-tightening can loosen the screw or cause screws to come off, 
which may result in short circuits or other damage.  

  M2 (2 mm) 

0.22 N･m (2.2 kgf･cm) 

  M2.5 (2.5 mm) 

0.36 N･m (3.5 kgf･cm) 

  M3 (3 mm) 

0.51 N･m (5.0 kgf･cm) 

  M2.5x4 PSP TITE screws 

0.204 N･m (2.0 kgf･cm)  

  M2.5x6 GIZA TITE screws 

0.36 N･m (3.5 kgf･cm)