Toshiba A10 Series Manual Do Utilizador

An external analog monitor can be connected to the external monitor port on the
computer. The computer supports VGA and Super VGA video modes. To connect a
monitor, follow the steps below.

1.

Turn the computer off.

2.

Connect the monitor to the external monitor port.

3.

Turn the monitor’s power on.

4.

Turn the computer on.

When you turn on the power, the computer automatically recognizes the monitor
and determines whether it is color or monochrome.

To change the display settings, press 

. If you disconnect the monitor

before you turn the computer off, be sure to press 

 to switch to the internal

the display setting.

Some models are equipped with TV out port.You can connect a television set to the
TV out jack on the computer. Follow the steps below.

1.

Turn the computer off.

2. Use the TV adaptor cable's S-Video plug (not supplied) to connect the

television to the TV out port.

3. Turn the television on.

4. Turn the computer on.

You can use the hot keys 

 + 

to change the display device. Refer to Chapter 5,

Display 

®